Send Message

Single Position Battery Packing Tape Machine Convenient Maintenance 800KG

Negotiation, email communication
Single Position Battery Packing Tape Machine Convenient Maintenance 800KG
Features Gallery Product Description Request A Quote
Stable: 97%
Speed: ≥6PPM/min
Qualified: 99.50%
Weight: 800KG
Tape Inside Diameter: φ75mm
Tape Width: 200mm
High Light:

lithium ion battery manufacturing machines


lithium ion battery pack assembly line

Basic Infomation
Place of Origin: China
Brand Name: ZeCheng
Model Number: ZC-AA-22
Payment & Shipping Terms
Packaging Details: Wooden box
Delivery Time: 90 Working day
Payment Terms: L/C, T/T
Supply Ability: 10 sets per months
Product Description

Single Position Battery Packing Tape Machine Convenient Maintenance 800KG


I. device function 3

2. Process requirements 3

Iii. Equipment introduction

Iv. Main components of equipment

Environmental requirements 17

Vi. Brands of main components

Installation and debugging 18

Viii. Acceptance requirements 18

Ix. Equipment quality assurance

Intellectual property rights 19

Dispute resolution 20

Xii. Breach of contract and liabilities 20

Xiii. Other 20

1. Device functions

(1) the device is suitable for the function of automatic enclosure membrane of square aluminum battery, and it can be fed and fed manually or connected automatically.

(2) incoming quality products by feeding mechanism will deliver the battery to capsular, for institutions to prepare adhesive glue, controlled by servo manipulator, the battery into plastic bags, under the rotation of the roller, the battery pack glue in "U" type way, then the battery side by side and top plastic bags rubber and battery at the bottom of the top rubber on the battery, battery posted six surface glue.

(3) manual feeding cache, automatic feeding of the manipulator, battery envelope (6 sides), material cache under the mechanical hand.

  1. . Process requirements
  1. basic technical parameters of the equipment:
NO. project Specifications describe note
1 Equipment capacity P 6 PPM Prototype battery only (simplex design)
2 Product pass rate ≥99%(only bad products caused by equipment) single plane flatness ±1mm  
3 Equipment failure rate ≤2% (failure caused by equipment only)  
4 Thickness of insulation film 80 mu mu m - 150 m With isolation paper
5 Compressed air requirement 0.5 ~ 0.65 Mpa usage: 100 l/min  
6 The power supply AAC380V plus or minus 10%  
7 Upper insulation film mode Manual feeding, belt connection, film pulling;  
8 The noise sound ≤75db(1000mm away from the outer wall of the equipment and operation measurement))  





Coated appearance

1) bubble diameter <3mm; Points < 5pcs/ side; Fold bubble length < 5mm, width < 1.5mm, quantity < 2pcs/ side;

2) no foreign body is allowed between the electric core shell and the insulation film;

3) there should be no foreign bodies on the battery surface (including electrolyte);

4) the sag degree on one side of the battery is ±1.0mm

5) envelope alignment accuracy ±0.5mm;

11 MTBF (mean fail-free time) : >4 h  
12 The weight of the Load bearing per unit area ≤650Kg/M  
  1. acceptance model:



Cell size (thickness * width * length) (mm)
1 Based on batteries 36*130*240
  1. battery specification and model:


Cell size (thickness * width * length) (mm)
1 Based on batteries 36*130*240
2 Maximum compatible size 150-240 (length direction)


2.3 The process flow

2.4 The technological requirements

Feeding and positioning
  1. Manually place the cell on the belt cable;
  2. The belt is in step form. There are guardrails to prevent the cell from being askew.
Batteries, plastic bags
  1. Simplex position envelop mechanism is adopted.
  2. The membrane is of 80-150um isolation paper structure.
  3. Adopt the u-type adhesive coating mode and cut the bottom
  4. Side pack shall overlap 5 mm.
  5. the large surface of the package is flat without wrinkles.
  6. the top of the folding requirements neat.
Blanking and transshipment
  1. The battery is placed vertically at the pull-out line (the pole column of the battery is upward).


4,Main components of equipment

NO. Work station Part name Quantity note
1 Feeding wire Stepper motor 1  
2 Drawstring * L3000 Article 1.  
3 Roller guardrail Article 2.  
4 Positioning cylinder 1  



1 set of  
6 Stop the cylinder six  
7 Stop institutions six  
16 Packing and feeding station The X axis module 1 set of  
17 The Y axis module 1 set of  
18 Mounting plate 1 set of  
19 Grip the cylinder 1  
20 Gripper insulation pad 2  
21 Rotating mechanism 1  
22 The rotating cylinder 1  
23 Flexible alarm mechanism 1 set of  
24 X axis, Y axis motor 2  
25 Module bracket 1 set of  
26 Pushing location Push material clamp cylinder 1  
27 A rotary motor 1  
28 Pushing module 1  
29 Secondary positioning mechanism 1 set of  
30 Bag JiaoGong bit The bottom rubber roller Article 2.  
31 Plastic bags institutions 2 sets of  
32 Servo motor 2  
33 Pull the rubber roller 1  
34 Pull glue agency 1 set of  
35 Magnetic powder clutch 1  
36 Pull plastic machine 1  
37 Laminated cylinder 1  
38 Clamp device 1 set of  
39 Rubber cutting cylinder 1  
40 cutter 1  
41 Rubber cutting institutions 1 set of  
42 Bottom side cots 2  
43 Package bottom side mechanism 2 sets of  
44 Mounting plate 1 set of  
45 Put JiaoGong a Gas rose axis 2  
46 Magnetic powder clutch 2  
47 A roll four  
48 Electrostatic mechanism 1 set of  
49 The tension cylinder 1  
50 The tension roller 1  
51 Mounting plate 1 set of  
52 stents 1 set of  
53 Corner cut location Rubber cutting institutions 1 set of  
54 cutter four  
55 Activity of cylinder 1  
56 Side wrapping position Side covering mechanism 2 set of  
57 Forward cylinder 2  
58 Positioning cylinder 2  
59 Packing side glue cylinder four  
60 Transplanting station Rodless cylinder 1  
61 Battery moving jig 5 sets of  
62 Upper and lower cylinder five  
63 The rotating cylinder 1  
64 Transplanting mechanism 1 set of  
65 Plastic bag positioning station Locate the component 4 sets of  
66 stents 1 set of  
67 Pressure cylinder four  
68 Upper and lower cylinder four  
69 The clamping cylinder eight  

Folding station


Folding mechanism 2 sets of  
71 Forward cylinder 2  
72 Positioning cylinder 2  
73 Activity of cylinder four  
74 Upper and lower cylinder 2  
75 Left and right moving cylinder 2  

Blanking station


The X axis module 1 set of  
77 The Y axis module 1 set of  
78 Mounting plate 1 set of  
79 Grip the cylinder 1  
80 Gripper insulation pad 2  
81 Flexible alarm mechanism 1 set of  
82 X axis, Y axis motor 2  
83 stents 1 set of  
84 Rack system rack 1 set of  
86 Control system PLC 1 set of  
87 Touch screen 1 set of  
89 Low voltage electrical appliances 1 set of  
90 Photoelectric sensor 102  
91 Solenoid valve 51  
  1. Environmental requirements
  1. compressed air: air source pressure (compressed air) > 0.5-0.6mpa, maximum consumption of 19L/min, dryin环境温度:10~35℃
  2. relative humidity: 5 ~ 55% HR
  3. power source: AC220V, single-phase; Voltage fluctuation is less than ±10%; Power supply: 12KW
  4. true air: vacuum degree: -100kp ~ -70kp, stable negative pressure, to meet the stable production of equipmet

7,Installation and debugging

When the equipment arrives at the demand site, the demander shall provide power, air source, vacuum and acceptance materials for installation and debugging at the site free of charge. The supplier shall be responsible for the installation and debugging of the equipment, and carry out trial production of 100, 500, 1000 and 5000PCS to gradually increase the production capacity;

Cooperation commitment

1. New equipment promise

Our company guarantees that the goods provided to customers are brand new, complete and unused equipment.

2. Confidentiality commitment

Our company promises that without the written permission of any party, the other party's related drawings, technical information, business information and other business secrets and technical secrets must not be leaked to third parties in any way.

3. After-sales service commitment

(1)Two months from the date of shipment of the equipment, Party B is responsible for non-human faults in a timely and free warranty within one year (when the equipment is faulty, the after-sales service staff will respond within 2 hours after receiving the notification. According to the situation, personnel must be in place within 48 hours. No later than 60 hours, to ensure the continuity of production by the buyer;

(2)After the equipment has passed the warranty period, if there is a problem, the two parties communicate and deal with it. If necessary, after-sales personnel will be sent to repair it, and only the cost will be charged. Zh

(3)During the warranty period stipulated in the contract and technical agreement signed by the two parties, the company will provide a warranty for quality problems that are not caused by human damage during the normal use of our products.

Single Position Battery Packing Tape Machine Convenient Maintenance 800KG 0Single Position Battery Packing Tape Machine Convenient Maintenance 800KG 1Single Position Battery Packing Tape Machine Convenient Maintenance 800KG 2Single Position Battery Packing Tape Machine Convenient Maintenance 800KG 3

Recommended Products
Get in touch with us
Contact Person : Li
Tel : +86 15919498971
Fax : 86-755-33183262
Characters Remaining(20/3000)