20 PPM Laser Sealing Machine For Cleaning Cylindrical Battery 18650 Dirt
Used for cleaning dirt such as iron scrap, dirt, electrolyte and other dirt on the surface of cylindrical battery 18650 after sealing, cleaning drying water droplets twice, spraying anti-rust oil and drying.
1.. Equipment action flow
Connect the seal into the battery → one brush (warm water can add cleaning agent) → one cut water → two high pressure rinse (without cleaning agent) → two cut water
→ transition → air drying → baking → transition → shell surface spray code → transition → spray anti-rust oil → baking → discharge.
2.technical parameters of the equipment
| The basic parameters | |
| Single machine efficiency | P 120 PPM |
| Chain linear velocity | Variable frequency adjustable 0-3m/Min |
| Product pass rate | 99.50% |
| Device rotation rate | 98% |
| Standard water consumption | Recycle 10L of water in an hour for 1000 batteries |
| The noise | 80 db or less |
| Plant configuration | |
| The compressed air | Acuity 0.6 MPa |
| The input voltage | 380 v / 50 hz, 25 kw |
| Tap water | Provide 1 inch water pipe interface to the equipment installation bit |
| Waste water discharge | Provide 1 inch waste water discharge pipe interface to the equipment installation bit |
3. Main components of the equipment
| NO | The name of the | The content is introduced |
| 1 | Feeding and docking mechanism | 1 set, connect with the sealing machine to pull the material out. |
| 2 | Conveyor chain | 2 sets, stainless steel chain, battery support on the iron roller, iron roller and ladder type rubber friction, drive the battery rotation, ensure the uniform cleaning and oil consistency; The conveyor chain is driven by variable frequency speed regulating motor. |
| 3 | Scrub institutions | 1 set, continuously pump out high pressure water when brushing, flat brush mechanism, divided into brush main body, brush both ends. 1# tank hot water spray battery when scrubbing. |
| 4 | Cut the water agencies | 2 sets, 1 set after washing and 1 set after washing. Adopt 1 vortex fan. |
| 5 | Baking institutions | Two sets, the use of whirlpool fan with the heat pipe, the battery before and after oil baking, the battery surface temperature ≤60℃ |
| 6 | Printing mechanism | 1 set. After cleaning and drying, the shell surface is sprayed with imaz 9030 |
| 7 | Oil institutions | 1 set, using a spray gun to spray oil, rust agent must use water - soluble rust agent. The spray gun is made of oil mist by precise pressure regulating valve. |
| 8 | Tank body | Two sets, two stainless steel water tank completely independent, with two stainless steel water pumps, automatic water supply, automatic drainage. Stainless steel float level gauge, automatic detection of water level; When the high pressure flushing, the pump pump water by the nozzle to flush the battery cap and rolling groove. |
| 9 | rack | It's divided into two sections. The first section is for scrubbing, rinsing and cutting water. The second part is oil drying. The sealing chain part is made of 304# stainless steel, the others are square baking paint. |
| 10 | The man-machine interface | 1 set, rotate the man-machine interface. |
1. New equipment promise
Our company guarantees that the goods provided to customers are brand new, complete and unused equipment.
2. Confidentiality commitment
Our company promises that without the written permission of any party, the other party's related drawings, technical information, business information and other business secrets and technical secrets must not be leaked to third parties in any way.
3. After-sales service commitment
(1) Two months from the date of shipment of the equipment, Party B is responsible for non-human faults in a timely and free warranty within one year (when the equipment is faulty, the after-sales service staff will respond within 2 hours after receiving the notification. According to the situation, personnel must be in place within 48 hours. No later than 60 hours, to ensure the continuity of production by the buyer;
(2) After the equipment has passed the warranty period, if there is a problem, the two parties communicate and deal with it. If necessary, after-sales personnel will be sent to repair it, and only the cost will be charged. Zh
(3) During the warranty period stipulated in the contract and technical agreement signed by the two parties, the company will provide a warranty for quality problems that are not caused by human damage during the normal use of our products.
