Send Message

Adjustable Li Ion Battery Manufacturing Equipment 8PPM Hot Cold Press Machine

Adjustable Li Ion Battery Manufacturing Equipment 8PPM Hot Cold Press Machine
Features Gallery Product Description Request A Quote
Press: ≤ 2000KG
The Temperature Precision: ±1℃
Compressed Air System: 0.4-0.6MPa
Speed: 8PPM
Voltage: AC220±10%
Pressure Of Work(T): 2
High Light:

flaten Li Ion Battery Manufacturing Equipment


0.6MPa Li Ion Battery Manufacturing Equipment


Li Ion Battery Hot Cold Press machine

Basic Infomation
Place of Origin: China
Brand Name: Zecheng
Model Number: ZCA07-202
Payment & Shipping Terms
Packaging Details: Wooden box
Delivery Time: 90 workdays
Payment Terms: L/C, T/T
Supply Ability: 10 sets per months
Product Description

8PPM Adjustable Li Ion Battery Manufacturing Equipment Battery Cell Hot Cold Press machine


1, The profile

The device is mainly used to flaten the rolled square cell or the square cell after lamination. The pressure and temperature can be adjusted according to the needs.


--- the battery in each station is pressed flat by gas-liquid booster cylinder, and the pressure can be adjusted.Adopt conveyor belt type to drive the battery to move.

-- high efficiency: double station, one station hot press, two stations cold press.Hot press and cold press.8 PCS/min (the specific efficiency is determined according to the hot pressing and cold pressing time)

-- low operating costs

The equipment has high degree of automation and simple manual operation..

Flat pressure: ≤ 2000KG

2. Flat pressing area: 350x480mm

3. Parallelism of pressing plate: ≤ 0.1mm

4. The flat pressure and time can be adjusted;

5, hot and cold pressure are equipped with pressure sensors and pressure display

To adapt to the specifications


3.1 adaptive objectsThe battery size


Model With(mm) Length(mm) Thickness(mm)
37AH 100-150 90-215 5-20
68AH 100-150 90-215 5-20
78AH 100-150 90-215 5-20
80AH 100-150 90-215 5-20



Adjustable Li Ion Battery Manufacturing Equipment 8PPM Hot Cold Press Machine 0


3.2 technical parameters of the equipment






Technical parameters

efficiency(PPM) 8(According to hot pressing, cold pressing time)
Fixture width adjustable range Adjustable or replacement, reference to adapt to the battery model
Pressure of work(T) 2
Temperature control accuracy +/-1℃
Compressed air system 0.4-0.6MPa
The total power(kw) 15
Normal operating power(kw) 13



Adjustable Li Ion Battery Manufacturing Equipment 8PPM Hot Cold Press Machine 1


4, Mechanical specifications

4.1 rack systemThe device has a square welding frame, and the substrate is a steel plate with a thickness of 25-30mm. The surface is electroplated.

4.2 automatic feeding systemThe stepping motor drives the conveyor belt to move the battery from the feeding station to the hot press, from the hot press station to the cold press station, from the cold press station to the unloading station.

4.3 hot pressing systemThe upper and lower pressure plate is heated through the heating pipe, the temperature controller controls the temperature, the hot pressing time is set from the touch screen, and the pressure of the gas-liquid pressure cylinder can be adjusted.Hot pressing area 350*480mm.

4.4 cold pressure systemAfter the hot pressing is completed, the cell is moved to the cold pressing station, the lower template is cooled by circulating water, the cold pressing time is set from the touch screen, the pressure of the gas-liquid booster cylinder can be adjusted, and the cold pressing area is 350*480.

4.5 operating systemTouch screen operation.There is power on, emergency stop, manual, automatic button.

4.6 control panelThe machine is equipped with independent electrical board, leakage switch, dc stability power supply and other power circuit components, control PLC, relay, motor control device, etc.And external connection, using connectors and terminal table.PLC adopts omron.The ceiling of the power cable is partially perforated.Cables and air ducts between other equipment are wired and piped below.

4. 7 rectifying systemAutomatic correction of PET conveyor belt offset.


5. Energy mediumPlease provide the following energy medium

5.1, power supply

1) instantaneous change of voltage AC220V± 10% counterphase

2, frequency 50 hz + 1 hz

5.2, Air

1) pressure 0.5mpa 5kgf/cm2

5.3, capacity 1001/min

Environmental conditionsThe device can operate without barrier under the following environmental conditions.

1) temperature dynamic temperature: 5-35℃Storage temperature: 0-40℃

humidity 30-80% but should not dew.

3) environmental cleanliness shall not be lower than 100,000;No corrosive gas, liquid, explosive gas on site



Cooperation commitment

1. New equipment promise

Our company guarantees that the goods provided to customers are brand new, complete and unused equipment.

2. Confidentiality commitment

Our company promises that without the written permission of any party, the other party's related drawings, technical information, business information and other business secrets and technical secrets must not be leaked to third parties in any way.

3. After-sales service commitment

(1) Two months from the date of shipment of the equipment, Party B is responsible for non-human faults in a timely and free warranty within one year (when the equipment is faulty, the after-sales service staff will respond within 2 hours after receiving the notification. According to the situation, personnel must be in place within 48 hours. No later than 60 hours, to ensure the continuity of production by the buyer;

(2) After the equipment has passed the warranty period, if there is a problem, the two parties communicate and deal with it. If necessary, after-sales personnel will be sent to repair it, and only the cost will be charged. Zh

(3) During the warranty period stipulated in the contract and technical agreement signed by the two parties, the company will provide a warranty for quality problems that are not caused by human damage during the normal use of our products.



Q1: Are you factory or trading company?

A: We are factory, with our R&D team, production department, from battery welding machine, etc design , drawing, process, assembly,commission, and final package and shipping.

Q2: Do you accept customization?

A2: YES. we accept customized machine. our strong R&D with 10+year rich experience can do customization.

Q3: About Price?

A3: Price is negotiable. It can be changed according to each battery welding or sorting machine internal configuration ,and also your order quantity.

Q4: About delivery?

A4. Standard welding machine can be delivered within 10days. Customized battery assembly machine can be delivered within 40days or negotiable.



Recommended Products
Get in touch with us
Contact Person : Li
Tel : +86 15919498971
Fax : 86-755-33183262
Characters Remaining(20/3000)