Fully Automatic Liquid Injection Machine Battery Production Equipment
The profileThis equipment is mainly after the winding square batteries or laminated rectangular batteries for pressing, rolling, aluminum-plastic film automatic automatic correction automatic fixed-length cutting, automatic punching hole forming, batteries, automatic feeding, automatic short circuit test, automatic into the shell, aluminum-plastic film automatic folding, automatic sealing, automatic side sealing, HI - POT test automatically, automatic trimming, automatic coating, automatic blanking.
Features:
the whole packaging line has a high degree of automation. It is enough to manually put the whole battery into the feeding station after winding.
1.2 high efficiency: 15PPM
1.3 automatic short-circuit testing: automatic testing of hi-pot, and automatic elimination of unqualified.
1.4 low operation cost: the equipment has a high degree of automation and is easy to operate m
2.1.2 adapt to raw material specifications
| Material |
Feed way |
Material sheet length(mm) | Material width(mm) | The thickness of the material(μm) | Largest diameter(mm) |
The inner diameter(mm) |
||
| Size range | Size range | tolerance | Size range | The tolerance | ||||
| Aluminium plastic film | coil | coil | 150-300 | 0.2 | 100-200 | 5 | ф400 | ф76.2 |
2.1.3.To adapt to the specifications
2.1.3.1 adaptive objectsThe battery size
| Model | W(mm) | L(mm) | H |
| ZLA01A | 20-50 | 30-70 | 2-8 |
|
specifications Item |
ZLA01A | |
|
Technical parameters
|
Efficiency(PPM) | 15 |
| Pressure(T) | 3 | |
| Temperature control accuracy | +/-1℃ | |
| Edge width | 3-10mm | |
| Encapsulation time range | 3-6S | |
| Sealing side thickness | 0.19-0.3mm(Can be set) | |
| Temperature setting | 180°adjustable | |
| Precision of automatic forming outline size | ±0.2mm | |
| Hole depth accuracy | ±0.1mm | |
| Upper and lower film alignment | 小于0.3mm | |
| Maximum pressure | 3T(The pressure is adjustable) | |
| Press mold to ensure the normal service life | More than a million times | |
| Compressed air system | Air source provided by party a | |
| The total power(kw) | 18 | |
| Normal operating power(kw) | 15 | |
| Qualified rate of equipment products | ≥95% (A bad product caused only by the machine) | |
| Equipment failure rate | ≤5%(Failure caused by equipment only) | |
1. New equipment promise
Our company guarantees that the goods provided to customers are brand new, complete and unused equipment.
2. Confidentiality commitment
Our company promises that without the written permission of any party, the other party's related drawings, technical information, business information and other business secrets and technical secrets must not be leaked to third parties in any way.
3. After-sales service commitment
(1) Two months from the date of shipment of the equipment, Party B is responsible for non-human faults in a timely and free warranty within one year (when the equipment is faulty, the after-sales service staff will respond within 2 hours after receiving the notification. According to the situation, personnel must be in place within 48 hours. No later than 60 hours, to ensure the continuity of production by the buyer;
(2) After the equipment has passed the warranty period, if there is a problem, the two parties communicate and deal with it. If necessary, after-sales personnel will be sent to repair it, and only the cost will be charged. Zh
(3) During the warranty period stipulated in the contract and technical agreement signed by the two parties, the company will provide a warranty for quality problems that are not caused by human damage during the normal use of our products.
